How to check and maintain the film blowing machine?

Check the blower speed and control the film thickness. Observe the uniformity of the thickness of the adjustment film, and the folding diameter conforms to the standard. Check the air storage cylinder pressure, not too high, but there should be spare pressure. Check and control the raw material ratio and mix well. Check the raw materials for impurities. In particular, check the irons in time with a magnet. Check the lubrication of the gearbox and the cylinder of the air compressor. Regularly check the temperature rise and mechanical transmission of each running motor.

Instructions:

1. Check that the temperature is self-controlled and the heating appliance is in good condition. Pay attention to adjust the heating temperature of each point in time within the index range.

2. The film blowing machine checks the traction speed and controls the film thickness.

3. Observe the uniformity of the thickness of the adjustment film, and the folding diameter conforms to the standard.

4. Check the air storage cylinder pressure, not too high, but there should be spare pressure.

5. Check and control the ratio of raw materials and mix well.

6. The film blowing machine checks the raw materials for impurities, especially in time, check the irons with magnets.

7. Check the lubrication of the gearbox and the cylinder of the air compressor.

8. The film blowing machine regularly checks the temperature rise and mechanical transmission of each running motor.