Precautions when using a high blown film machine

1. Check whether the installation work of the high-blown blown film machine unit is installed as required, and check that the bolts are tightly fastened.

2. Check and add the gearbox and the lubricating oil in the air compressor to check the lubrication of the mechanical transmission parts of the high-blown film blowing machine.

3. Check the power supply and electrical parts, and each machine should have a safety ground.

4. The barrel of the high-blown blown film machine is not filled with plastic, filled with plastic and the temperature is not up to the requirement, and it is forbidden to start.

5. Check that there is no foreign matter in the material of the high-blown blown film machine. There must be no iron filings or other unqualified materials in the raw materials.

6. The material requirements should be dry, otherwise pre-drying should be carried out.

7. Check the high-blown blown film machine The heating system and temperature measuring system of the unit are in good condition.

8. During the booting process, irrelevant personnel should leave, to prevent the material from overheating and rushing out of the burn. To prevent the belt and the mixing tube from being injured, it is necessary to prevent the hair and clothing from being taken up.

Warm reminder: If you are interested in the high-blown blown film machine after reading this article, or you still have doubts about the high-profile blown film machine, please contact the Shandong blown film unit manufacturer.